{"title":"Copper to PEX Adapters","description":"\u003cp\u003eA copper to PEX adapter joins PEX tubing to existing copper pipe. One end connects to the PEX, and the other end is soldered (sweated) to the copper. These fittings are the standard way to repipe in PEX, extend an older copper system, or tie in a new fixture.\u003c\/p\u003e\n\u003cp\u003eThis collection includes PEX sweat adapters for each major PEX connection method. Crimp (F1807) adapters from Sioux Chief, HeatLink, Legend Valve and Viega PureFlow work with copper crimp rings. Expansion (F1960) adapters from MrPEX, HeatLink and Sioux Chief work with expansion rings. Viega PureFlow press adapters are made with a press tool. You will find male and female sweat ends, FTG (fitting) ends that slip inside another fitting, sweat adapter elbows, and reducing sizes from 3\/8\" up to 2\".\u003c\/p\u003e\n\u003cp\u003eMatch the PEX end to the tubing and tools you use, and match the sweat end to the copper size. Solder the copper side before you connect the PEX, so the heat does not damage the tubing.\u003c\/p\u003e\n\u003cp\u003eShop more \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003ePEX crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 expansion fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/viega-pureflow-press-fittings\"\u003eViega PureFlow press fittings\u003c\/a\u003e and \u003ca href=\"\/collections\/non-barrier-tubing\"\u003ePEX tubing\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"1-2-pex-sweat-adapter-crimp-f1807-x-ftg-sweat-brass","title":"HeatLink 27105NL 1\/2\" PEX Sweat Adapter (Crimp(F1807) x FTG Sweat) - Brass","description":"\u003cp\u003eHeatLink 27105NL is a 1\/2\" brass PEX sweat adapter with Crimp (F1807) x FTG Sweat connections.\u003c\/p\u003e\u003cp\u003eIn residential and light commercial plumbing and hydronic work, this fitting is used to transition from PEX to copper by soldering the sweat end. It belongs to HeatLink's F1807 crimp fitting range and is made of brass.\u003c\/p\u003e\u003cp\u003eConnections to PEX use the ASTM F1807 crimp method, so use a copper crimp ring and a crimp tool sized for the tubing. Check that every size listed (1\/2\") matches your tubing and piping, and that the connection types fit your system before installation. For sweat ends, solder the copper joint before making the PEX connection so heat does not reach the tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e HeatLink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 27105NL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Crimp (F1807) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/heatlink\"\u003eHeatLink\u003c\/a\u003e, \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eF1807 Crimp Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e\u003c\/p\u003e","brand":"HeatLink","offers":[{"title":"Default Title","offer_id":44350775492711,"sku":"HLNK-27105NL","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/27105NL-1-2-in-PEX-x-1-2-in-M-Sweat-No-Lead-Brass-Adapter.png?v=1785807429"},{"product_id":"1-2-pex-sweat-adapter-expansion-f1960-x-ftg-sweat-brass","title":"HeatLink EX27105NL 1\/2\" PEX Sweat Adapter (Expansion(F1960) x FTG Sweat) - Brass","description":"\u003cp\u003eHeatLink EX27105NL is a 1\/2\" brass PEX sweat adapter with Expansion (F1960) x FTG Sweat connections.\u003c\/p\u003e\u003cp\u003eIn residential and light commercial plumbing and hydronic work, this fitting is used to transition from PEX to copper by soldering the sweat end. It belongs to HeatLink's F1960 expansion fitting range and is made of brass.\u003c\/p\u003e\u003cp\u003eConnections to PEX use the ASTM F1960 cold expansion method, so use PEX-a tubing, matching expansion rings and an expansion tool with the correct head. Check that every size listed (1\/2\") matches your tubing and piping, and that the connection types fit your system before installation. For sweat ends, solder the copper joint before making the PEX connection so heat does not reach the tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e HeatLink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e EX27105NL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/heatlink\"\u003eHeatLink\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e\u003c\/p\u003e","brand":"HeatLink","offers":[{"title":"Default Title","offer_id":44350779457639,"sku":"HLNK-EX27105NL","price":4.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/EX27105NL-1-2-in-PEX-F1960-x-1-2-in-M-Sweat-No-Lead-Brass-Adapter.png?v=1785807547"},{"product_id":"3-4-pex-sweat-adapter-expansion-f1960-x-ftg-sweat-brass","title":"HeatLink EX27122NL 3\/4\" PEX Sweat Adapter (Expansion(F1960) x FTG Sweat) - Brass","description":"\u003cp\u003eHeatLink EX27122NL is a 3\/4\" brass PEX sweat adapter with Expansion (F1960) x FTG Sweat connections.\u003c\/p\u003e\u003cp\u003eIn residential and light commercial plumbing and hydronic work, this fitting is used to transition from PEX to copper by soldering the sweat end. It belongs to HeatLink's F1960 expansion fitting range and is made of brass.\u003c\/p\u003e\u003cp\u003eConnections to PEX use the ASTM F1960 cold expansion method, so use PEX-a tubing, matching expansion rings and an expansion tool with the correct head. Check that every size listed (3\/4\") matches your tubing and piping, and that the connection types fit your system before installation. For sweat ends, solder the copper joint before making the PEX connection so heat does not reach the tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e HeatLink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e EX27122NL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/heatlink\"\u003eHeatLink\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e\u003c\/p\u003e","brand":"HeatLink","offers":[{"title":"Default Title","offer_id":44350779490407,"sku":"HLNK-EX27122NL","price":9.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/EX27122NL-3-4-in-PEX-F1960-x-3-4-in-M-Sweat-No-Lead-Brass-Adapter.png?v=1785807548"},{"product_id":"1-pex-sweat-adapter-expansion-f1960-x-ftg-sweat-brass","title":"HeatLink EX27128NL 1\" PEX Sweat Adapter (Expansion(F1960) x FTG Sweat) - Brass","description":"\u003cp\u003eHeatLink EX27128NL is a 1\" brass PEX sweat adapter with Expansion (F1960) x FTG Sweat connections.\u003c\/p\u003e\u003cp\u003eIn residential and light commercial plumbing and hydronic work, this fitting is used to transition from PEX to copper by soldering the sweat end. It belongs to HeatLink's F1960 expansion fitting range and is made of brass.\u003c\/p\u003e\u003cp\u003eConnections to PEX use the ASTM F1960 cold expansion method, so use PEX-a tubing, matching expansion rings and an expansion tool with the correct head. Check that every size listed (1\") matches your tubing and piping, and that the connection types fit your system before installation. For sweat ends, solder the copper joint before making the PEX connection so heat does not reach the tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e HeatLink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e EX27128NL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/heatlink\"\u003eHeatLink\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e\u003c\/p\u003e","brand":"HeatLink","offers":[{"title":"Default Title","offer_id":44350779523175,"sku":"HLNK-EX27128NL","price":17.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/EX27128NL-1-in-PEX-F1960-x-1-in-M-Sweat-No-Lead-Brass-Adapter.png?v=1785807549"},{"product_id":"1-1-4-pex-sweat-adapter-expansion-f1960-x-ftg-sweat-brass","title":"HeatLink EX27135NL 1-1\/4\" PEX Sweat Adapter (Expansion(F1960) x FTG Sweat) - Brass","description":"\u003cp\u003eHeatLink EX27135NL is a 1-1\/4\" brass PEX sweat adapter with Expansion (F1960) x FTG Sweat connections.\u003c\/p\u003e\u003cp\u003eIn residential and light commercial plumbing and hydronic work, this fitting is used to transition from PEX to copper by soldering the sweat end. It belongs to HeatLink's F1960 expansion fitting range and is made of brass.\u003c\/p\u003e\u003cp\u003eConnections to PEX use the ASTM F1960 cold expansion method, so use PEX-a tubing, matching expansion rings and an expansion tool with the correct head. Check that every size listed (1-1\/4\") matches your tubing and piping, and that the connection types fit your system before installation. For sweat ends, solder the copper joint before making the PEX connection so heat does not reach the tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e HeatLink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e EX27135NL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/heatlink\"\u003eHeatLink\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e\u003c\/p\u003e","brand":"HeatLink","offers":[{"title":"Default Title","offer_id":44350779588711,"sku":"HLNK-EX27135NL","price":38.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/EX27135NL-1-1-4-in-PEX-F1960-x-1-1-4-in-M-Sweat-No-Lead-Brass-Adapter.png?v=1785807551"},{"product_id":"1-2-pex-sweat-adapter-expansion-f1960-x-sweat-brass","title":"HeatLink EX27205NL 1\/2\" PEX Sweat Adapter (Expansion(F1960) x Sweat) - Brass","description":"\u003cp\u003eHeatLink EX27205NL is a 1\/2\" brass PEX sweat adapter with Expansion (F1960) x Sweat connections.\u003c\/p\u003e\u003cp\u003eIn residential and light commercial plumbing and hydronic work, this fitting is used to transition from PEX to copper by soldering the sweat end. It belongs to HeatLink's F1960 expansion fitting range and is made of brass.\u003c\/p\u003e\u003cp\u003eConnections to PEX use the ASTM F1960 cold expansion method, so use PEX-a tubing, matching expansion rings and an expansion tool with the correct head. Check that every size listed (1\/2\") matches your tubing and piping, and that the connection types fit your system before installation. For sweat ends, solder the copper joint before making the PEX connection so heat does not reach the tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e HeatLink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e EX27205NL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/heatlink\"\u003eHeatLink\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e\u003c\/p\u003e","brand":"HeatLink","offers":[{"title":"Default Title","offer_id":44350779654247,"sku":"HLNK-EX27205NL","price":4.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/EX27205NL-1-2-in-PEX-F1960-x-1-2-in-F-Sweat-No-Lead-Brass-Adapter.png?v=1785807551"},{"product_id":"3-4-pex-sweat-adapter-expansion-f1960-x-sweat-brass","title":"HeatLink EX27222NL 3\/4\" PEX Sweat Adapter (Expansion(F1960) x Sweat) - Brass","description":"\u003cp\u003eHeatLink EX27222NL is a 3\/4\" brass PEX sweat adapter with Expansion (F1960) x Sweat connections.\u003c\/p\u003e\u003cp\u003eIn residential and light commercial plumbing and hydronic work, this fitting is used to transition from PEX to copper by soldering the sweat end. It belongs to HeatLink's F1960 expansion fitting range and is made of brass.\u003c\/p\u003e\u003cp\u003eConnections to PEX use the ASTM F1960 cold expansion method, so use PEX-a tubing, matching expansion rings and an expansion tool with the correct head. Check that every size listed (3\/4\") matches your tubing and piping, and that the connection types fit your system before installation. For sweat ends, solder the copper joint before making the PEX connection so heat does not reach the tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e HeatLink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e EX27222NL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/heatlink\"\u003eHeatLink\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e\u003c\/p\u003e","brand":"HeatLink","offers":[{"title":"Default Title","offer_id":44350779687015,"sku":"HLNK-EX27222NL","price":10.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/EX27222NL-3-4-in-PEX-F1960-x-3-4-in-F-Sweat-No-Lead-Brass-Adapter.png?v=1785807553"},{"product_id":"1-pex-sweat-adapter-expansion-f1960-x-sweat-brass","title":"HeatLink EX27228NL 1\" PEX Sweat Adapter (Expansion(F1960) x Sweat) - Brass","description":"\u003cp\u003eHeatLink EX27228NL is a 1\" brass PEX sweat adapter with Expansion (F1960) x Sweat connections.\u003c\/p\u003e\u003cp\u003eIn residential and light commercial plumbing and hydronic work, this fitting is used to transition from PEX to copper by soldering the sweat end. It belongs to HeatLink's F1960 expansion fitting range and is made of brass.\u003c\/p\u003e\u003cp\u003eConnections to PEX use the ASTM F1960 cold expansion method, so use PEX-a tubing, matching expansion rings and an expansion tool with the correct head. Check that every size listed (1\") matches your tubing and piping, and that the connection types fit your system before installation. For sweat ends, solder the copper joint before making the PEX connection so heat does not reach the tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e HeatLink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e EX27228NL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/heatlink\"\u003eHeatLink\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e\u003c\/p\u003e","brand":"HeatLink","offers":[{"title":"Default Title","offer_id":44350779719783,"sku":"HLNK-EX27228NL","price":16.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/EX27141NL-1-1-2-in-PEX-F1960-x-1-1-2-in-M-Sweat-No-Lead-Brass-Adapter.png?v=1785807554"},{"product_id":"1-2-pex-press-adapter-crimp-f1807-x-ftg-sweat-brass","title":"Legend Valve 460-613NL 1\/2\" PEX Press Adapter (Crimp(F1807) x FTG Sweat) - Brass","description":"\u003cp\u003eLegend Valve 460-613NL is a 1\/2\" PEX press adapter in brass, Crimp(F1807) x FTG Sweat.\u003c\/p\u003e\u003cp\u003eAn adapter changes the connection type to a female pipe thread.\u003c\/p\u003e\u003cp\u003eASTM F1807 fittings are metal insert fittings joined with a copper crimp ring or a stainless cinch clamp and the matching tool.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Legend Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 460-613NL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Press Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Crimp(F1807) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ASTM F1807\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead content:\u003c\/strong\u003e No Lead (0.25% max weighted lead, NSF\/ANSI 372)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 662545109657\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eall f1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ePEX tools\u003c\/a\u003e, \u003ca href=\"\/collections\/legend-valve\"\u003eall Legend Valve\u003c\/a\u003e.\u003c\/p\u003e","brand":"Legend Valve","offers":[{"title":"Default Title","offer_id":44350876418151,"sku":"LEGE-460-613NL","price":2.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/NLF1807PEXxFTGAdapter.jpg?v=1785808957"},{"product_id":"1-2-pex-sweat-adapter-crimp-f1807-x-sweat-brass","title":"Legend Valve 460-623NL 1\/2\" PEX Sweat Adapter (Crimp(F1807) x Sweat) - Brass","description":"\u003cp\u003eLegend Valve 460-623NL is a 1\/2\" PEX sweat adapter in brass, Crimp(F1807) x Sweat.\u003c\/p\u003e\u003cp\u003eA sweat adapter takes PEX to copper: solder the copper end first, then make the PEX connection once it has cooled.\u003c\/p\u003e\u003cp\u003eASTM F1807 fittings are metal insert fittings joined with a copper crimp ring or a stainless cinch clamp and the matching tool.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Legend Valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 460-623NL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Crimp(F1807) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ASTM F1807\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead content:\u003c\/strong\u003e No Lead (0.25% max weighted lead, NSF\/ANSI 372)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 662545109688\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eall f1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ePEX tools\u003c\/a\u003e, \u003ca href=\"\/collections\/legend-valve\"\u003eall Legend Valve\u003c\/a\u003e.\u003c\/p\u003e","brand":"Legend Valve","offers":[{"title":"Default Title","offer_id":44350876450919,"sku":"LEGE-460-623NL","price":2.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/NLF1807PEXxSweatAdapter_large_9d6a73b9-b231-444a-b478-3a7692d51fdb.jpg?v=1785808959"},{"product_id":"1-pex-sweat-adapter-expansion-f1960-x-ftg-sweat-brass-mpex-4841010","title":"MrPEX Systems 4841010 1\" PEX Sweat Adapter (Expansion(F1960) x FTG Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4841010 is a 1\" brass PEX sweat adapter with an ASTM F1960 expansion x FTG Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper with an FTG (fitting-size) sweat end that solders into a copper fitting socket. Listed size: 1\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4841010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981260670\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.04 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040258151,"sku":"MPEX-4841010","price":25.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS20_VII.jpg?v=1785812018"},{"product_id":"1-1-4-pex-sweat-adapter-expansion-f1960-x-sweat-brass","title":"MrPEX Systems 1-1\/4\" PEX Sweat Adapter (Expansion(F1960) x Sweat) - Brass 4841313","description":"\u003cp\u003eMrPEX Systems 4841313 is a 1-1\/4\" lead-free brass PEX sweat adapter, F1960 expansion x male sweat, for joining PEX to copper.\u003c\/p\u003e\u003cp\u003eThis fitting transitions from PEX tubing to copper piping with a soldered (sweat) joint. It is used in potable water plumbing and hydronic heating lines.\u003c\/p\u003e\u003cp\u003eF1960 fittings are joined to PEX-a tubing with expansion rings and an expansion tool. Before ordering, confirm your tubing type and size (1-1\/4\") and use the correct rings and tools for the F1960 system; do not mix connection standards on the same joint. Solder the copper end before connecting the PEX side so heat does not reach the tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4841313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e PEX sweat adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e ASTM F1960 expansion x male sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Lead-free brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981262179\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-pipe\"\u003ePEX Pipe\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040290919,"sku":"MPEX-4841313","price":35.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS23_VII.jpg?v=1785812019"},{"product_id":"1-1-2-pex-sweat-adapter-expansion-f1960-x-ftg-sweat-brass","title":"MrPEX Systems 4841515 1-1\/2\" PEX Sweat Adapter (Expansion(F1960) x FTG Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4841515 is a 1-1\/2\" brass PEX sweat adapter with an ASTM F1960 expansion x FTG Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper with an FTG (fitting-size) sweat end that solders into a copper fitting socket. Listed size: 1-1\/2\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4841515\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981262186\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040323687,"sku":"MPEX-4841515","price":51.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS26_VII.jpg?v=1785812020"},{"product_id":"2-pex-sweat-adapter-expansion-f1960-x-ftg-sweat-brass","title":"MrPEX Systems 4842020 2\" PEX Sweat Adapter (Expansion(F1960) x FTG Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4842020 is a 2\" brass PEX sweat adapter with an ASTM F1960 expansion x FTG Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper with an FTG (fitting-size) sweat end that solders into a copper fitting socket. Listed size: 2\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4842020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981262209\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040421991,"sku":"MPEX-4842020","price":107.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS29_VII.jpg?v=1785812022"},{"product_id":"1-2-pex-sweat-adapter-expansion-f1960-x-ftg-sweat-brass-mpex-4845050","title":"MrPEX Systems 4845050 1\/2\" PEX Sweat Adapter (Expansion(F1960) x FTG Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4845050 is a 1\/2\" brass PEX sweat adapter with an ASTM F1960 expansion x FTG Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper with an FTG (fitting-size) sweat end that solders into a copper fitting socket. Listed size: 1\/2\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4845050\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981260687\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.013 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040454759,"sku":"MPEX-4845050","price":7.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS13_VII.jpg?v=1785812023"},{"product_id":"1-2-x-3-4-pex-sweat-adapter-expansion-f1960-x-ftg-sweat-brass","title":"MrPEX Systems 4845075 1\/2\" x 3\/4\" PEX Sweat Adapter (Expansion(F1960) x FTG Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4845075 is a 1\/2\" x 3\/4\" brass PEX sweat adapter with an ASTM F1960 expansion x FTG Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper with an FTG (fitting-size) sweat end that solders into a copper fitting socket. Listed size: 1\/2\" x 3\/4\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4845075\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981260694\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.017 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040487527,"sku":"MPEX-4845075","price":10.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS13_VII_353f4ab2-fcdc-473e-9b0d-1c2587d3c780.jpg?v=1785812024"},{"product_id":"3-4-x-1-2-pex-sweat-adapter-expansion-f1960-x-ftg-sweat-brass","title":"MrPEX Systems 4847550 3\/4\" x 1\/2\" PEX Sweat Adapter (Expansion(F1960) x FTG Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4847550 is a 3\/4\" x 1\/2\" brass PEX sweat adapter with an ASTM F1960 expansion x FTG Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper with an FTG (fitting-size) sweat end that solders into a copper fitting socket. Listed size: 3\/4\" x 1\/2\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4847550\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\" x 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981260700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.021 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040520295,"sku":"MPEX-4847550","price":12.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS13_VII_1a87cc8c-abd6-4c2b-9d3c-e0fff2714794.jpg?v=1785812025"},{"product_id":"3-4-pex-sweat-adapter-expansion-f1960-x-ftg-sweat-brass-mpex-4847575","title":"MrPEX Systems 4847575 3\/4\" PEX Sweat Adapter (Expansion(F1960) x FTG Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4847575 is a 3\/4\" brass PEX sweat adapter with an ASTM F1960 expansion x FTG Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper with an FTG (fitting-size) sweat end that solders into a copper fitting socket. Listed size: 3\/4\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4847575\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981260717\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.025 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040553063,"sku":"MPEX-4847575","price":14.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS17_VII.jpg?v=1785812026"},{"product_id":"1-pex-sweat-adapter-expansion-f1960-x-sweat-brass-mpex-4851010","title":"MrPEX Systems 4851010 1\" PEX Sweat Adapter (Expansion(F1960) x Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4851010 is a 1\" brass PEX sweat adapter with an ASTM F1960 expansion x Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper tube with a solder (sweat) connection, for transitions between existing copper and new PEX. Listed size: 1\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4851010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981260724\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.043 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040618599,"sku":"MPEX-4851010","price":26.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS07_VII.jpg?v=1785812028"},{"product_id":"1-1-4-pex-sweat-adapter-expansion-f1960-x-sweat-brass-mpex-4851313","title":"MrPEX Systems 1-1\/4\" PEX Sweat Adapter (Expansion(F1960) x Sweat) - Brass 4851313","description":"\u003cp\u003eMrPEX Systems 4851313 is a 1-1\/4\" lead-free brass PEX sweat adapter, F1960 expansion x female sweat, for joining PEX to copper.\u003c\/p\u003e\u003cp\u003eThis fitting transitions from PEX tubing to copper piping with a soldered (sweat) joint. It is used in potable water plumbing and hydronic heating lines.\u003c\/p\u003e\u003cp\u003eF1960 fittings are joined to PEX-a tubing with expansion rings and an expansion tool. Before ordering, confirm your tubing type and size (1-1\/4\") and use the correct rings and tools for the F1960 system; do not mix connection standards on the same joint. Solder the copper end before connecting the PEX side so heat does not reach the tubing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4851313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e PEX sweat adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e ASTM F1960 expansion x female sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Lead-free brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981262216\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-pipe\"\u003ePEX Pipe\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040684135,"sku":"MPEX-4851313","price":43.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS10_VII.jpg?v=1785812029"},{"product_id":"1-1-2-pex-sweat-adapter-expansion-f1960-x-sweat-brass","title":"MrPEX Systems 4851515 1-1\/2\" PEX Sweat Adapter (Expansion(F1960) x Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4851515 is a 1-1\/2\" brass PEX sweat adapter with an ASTM F1960 expansion x Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper tube with a solder (sweat) connection, for transitions between existing copper and new PEX. Listed size: 1-1\/2\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4851515\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981262223\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040716903,"sku":"MPEX-4851515","price":61.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS10_VII_39ecc699-8585-4371-83ff-fbf1771b9a12.jpg?v=1785812030"},{"product_id":"2-pex-sweat-adapter-expansion-f1960-x-sweat-brass","title":"MrPEX Systems 4852020 2\" PEX Sweat Adapter (Expansion(F1960) x Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4852020 is a 2\" brass PEX sweat adapter with an ASTM F1960 expansion x Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper tube with a solder (sweat) connection, for transitions between existing copper and new PEX. Listed size: 2\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4852020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981262230\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040749671,"sku":"MPEX-4852020","price":122.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS10_VII_2af102af-4231-441a-9d1e-9a9ace5f1986.jpg?v=1785812031"},{"product_id":"1-2-pex-sweat-adapter-expansion-f1960-x-sweat-brass-mpex-4855050","title":"MrPEX Systems 4855050 1\/2\" PEX Sweat Adapter (Expansion(F1960) x Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4855050 is a 1\/2\" brass PEX sweat adapter with an ASTM F1960 expansion x Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper tube with a solder (sweat) connection, for transitions between existing copper and new PEX. Listed size: 1\/2\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4855050\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981260731\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.01 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040782439,"sku":"MPEX-4855050","price":6.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS02_VII.jpg?v=1785812032"},{"product_id":"1-2-x-3-4-pex-sweat-adapter-expansion-f1960-x-sweat-brass","title":"MrPEX Systems 4855075 1\/2\" x 3\/4\" PEX Sweat Adapter (Expansion(F1960) x Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4855075 is a 1\/2\" x 3\/4\" brass PEX sweat adapter with an ASTM F1960 expansion x Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper tube with a solder (sweat) connection, for transitions between existing copper and new PEX. Listed size: 1\/2\" x 3\/4\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4855075\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981260748\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.019 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040815207,"sku":"MPEX-4855075","price":11.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS02_VII_2881a538-a466-41c2-9fe8-1cac0df354f3.jpg?v=1785812034"},{"product_id":"3-4-pex-sweat-adapter-expansion-f1960-x-sweat-brass-mpex-4857575","title":"MrPEX Systems 4857575 3\/4\" PEX Sweat Adapter (Expansion(F1960) x Sweat) - Brass","description":"\u003cp\u003eMrPEX Systems 4857575 is a 3\/4\" brass PEX sweat adapter with an ASTM F1960 expansion x Sweat connection.\u003c\/p\u003e\u003cp\u003eThis sweat adapter joins PEX to copper tube with a solder (sweat) connection, for transitions between existing copper and new PEX. Listed size: 3\/4\". Solder the copper end before making the expansion joint so heat does not reach the PEX.\u003c\/p\u003e\u003cp\u003eF1960 expansion fittings are used with PEX-a tubing and PEX expansion rings: the tubing and ring are expanded, the fitting is inserted, and the PEX shrinks back to form the seal. The brass body gives a rigid, durable fitting for plumbing and hydronic lines. Match the fitting size and expansion ring to the tubing, and follow local code and the tubing maker's installation instructions.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MrPEX Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4857575\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Expansion (F1960) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 603981260755\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.02 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/mr-pex-systems\"\u003eMrPEX Systems\u003c\/a\u003e, \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 Expansion Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/brass-fittings\"\u003eBrass Fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-expansion-tools\"\u003ePEX Expansion Tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"MrPEX Systems","offers":[{"title":"Default Title","offer_id":44351040847975,"sku":"MPEX-4857575","price":12.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/PPS05_VII.jpg?v=1785812034"},{"product_id":"1-2-x-3-4-pex-f1960-female-sweat-adapter-brass","title":"Sioux Chief 643WG23 3\/4\" PEX F1960 x 1\/2\" Male Sweat Adapter Brass","description":"\u003cp\u003eSioux Chief 643WG23 is a 3\/4\" F1960 expansion x 1\/2\" male sweat (MSWT) straight adapter in no-lead (NL\/DZR) brass.\u003c\/p\u003e\u003cp\u003eThe male sweat end is fitting-size copper: it solders into a copper fitting socket, so it transitions a PEX line into existing copper fittings and valves. F1960 joints are cold-expansion connections: the tube is expanded, the fitting inserted, and the PEX shrinks back onto it. With PowerPEX Type-B tube, Sioux Chief recommends a self-rotating power expansion tool.\u003c\/p\u003e\u003cp\u003eSioux Chief describes the one-piece fitting as full flow with no restriction. Match the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 643WG23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 3\/4\" F1960 expansion x 1\/2\" male sweat (MSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e No-lead (NL\/DZR) brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1960, CSA B137.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236409393\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 expansion fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351387861095,"sku":"SIOU-643WG23","price":10.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/643WG23.jpg?v=1785817118"},{"product_id":"1-pex-f1960-female-sweat-adapter-brass","title":"Sioux Chief 643WG4 1\" PEX F1960 x 1\" Male Sweat Adapter Brass","description":"\u003cp\u003eSioux Chief 643WG4 is a 1\" F1960 expansion x 1\" male sweat (MSWT) straight adapter in no-lead (NL\/DZR) brass.\u003c\/p\u003e\u003cp\u003eThe male sweat end is fitting-size copper: it solders into a copper fitting socket, so it transitions a PEX line into existing copper fittings and valves. F1960 joints are cold-expansion connections: the tube is expanded, the fitting inserted, and the PEX shrinks back onto it. With PowerPEX Type-B tube, Sioux Chief recommends a self-rotating power expansion tool.\u003c\/p\u003e\u003cp\u003eSioux Chief describes the one-piece fitting as full flow with no restriction. Match the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 643WG4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 1\" F1960 expansion x 1\" male sweat (MSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e No-lead (NL\/DZR) brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1960, CSA B137.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236409683\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 expansion fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351387893863,"sku":"SIOU-643WG4","price":20.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/643WG4.jpg?v=1785817119"},{"product_id":"1-2-pex-f1807-female-sweat-adapter-copper","title":"Sioux Chief 643X2 1\/2\" PEX F1807 x 1\/2\" Male Sweat Adapter Copper","description":"\u003cp\u003eSioux Chief 643X2 is a 1\/2\" F1807 crimp x 1\/2\" male sweat (MSWT) straight adapter in copper.\u003c\/p\u003e\u003cp\u003eThe male sweat end is fitting-size copper: it solders into a copper fitting socket, so it transitions a PEX line into existing copper fittings and valves. F1807 joints are made on SDR9 PEX tube with a copper crimp ring or a stainless V-Sleeve compression sleeve and the matching crimp or compression tool.\u003c\/p\u003e\u003cp\u003eMatch the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 643X2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 1\/2\" F1807 crimp x 1\/2\" male sweat (MSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1807, CSA B137.5, NSF\/ANSI 14, NSF\/ANSI\/CAN 61\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236481764\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.026 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eF1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351387926631,"sku":"SIOU-643X2","price":1.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/643X2.jpg?v=1785817120"},{"product_id":"3-4-pex-sweat-adapter-crimp-f1807-x-sweat-copper","title":"Sioux Chief 643X3 3\/4\" PEX Sweat Adapter (Crimp(F1807) x Sweat) Copper","description":"\u003cp\u003eSioux Chief 643X3 is a 3\/4\" F1807 crimp x 3\/4\" male sweat (MSWT) straight adapter in copper.\u003c\/p\u003e\u003cp\u003eThe male sweat end is fitting-size copper: it solders into a copper fitting socket, so it transitions a PEX line into existing copper fittings and valves. F1807 joints are made on SDR9 PEX tube with a copper crimp ring or a stainless V-Sleeve compression sleeve and the matching crimp or compression tool.\u003c\/p\u003e\u003cp\u003eMatch the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 643X3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 3\/4\" F1807 crimp x 3\/4\" male sweat (MSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1807, CSA B137.5, NSF\/ANSI 14, NSF\/ANSI\/CAN 61\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236481849\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.052 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eF1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351387959399,"sku":"SIOU-643X3","price":1.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/643X3.jpg?v=1785817121"},{"product_id":"1-pex-f1807-female-sweat-adapter-copper","title":"Sioux Chief 643X4 1\" PEX F1807 x 1\" Male Sweat Adapter Copper","description":"\u003cp\u003eSioux Chief 643X4 is a 1\" F1807 crimp x 1\" male sweat (MSWT) straight adapter in copper.\u003c\/p\u003e\u003cp\u003eThe male sweat end is fitting-size copper: it solders into a copper fitting socket, so it transitions a PEX line into existing copper fittings and valves. F1807 joints are made on SDR9 PEX tube with a copper crimp ring or a stainless V-Sleeve compression sleeve and the matching crimp or compression tool.\u003c\/p\u003e\u003cp\u003eMatch the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 643X4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 1\" F1807 crimp x 1\" male sweat (MSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1807, CSA B137.5, NSF\/ANSI 14, NSF\/ANSI\/CAN 61\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236481924\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.104 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eF1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351387992167,"sku":"SIOU-643X4","price":4.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/643X4.jpg?v=1785817122"},{"product_id":"3-4-pex-f1807-brass-male-sweat-adapter","title":"Sioux Chief 643XG3 3\/4\" PEX F1807 Brass Male Sweat Adapter","description":"\u003cp\u003eSioux Chief 643XG3 is a 3\/4\" F1807 crimp x 3\/4\" male sweat (MSWT) straight adapter in no-lead (NL\/DZR) brass.\u003c\/p\u003e\u003cp\u003eThe male sweat end is fitting-size copper: it solders into a copper fitting socket, so it transitions a PEX line into existing copper fittings and valves. F1807 joints are made on SDR9 PEX tube with a copper crimp ring or a stainless V-Sleeve compression sleeve and the matching crimp or compression tool.\u003c\/p\u003e\u003cp\u003eMatch the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 643XG3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 3\/4\" F1807 crimp x 3\/4\" male sweat (MSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e No-lead (NL\/DZR) brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1807, CSA B137.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236408761\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eF1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351388024935,"sku":"SIOU-643XG3","price":2.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/643XG3.jpg?v=1785817123"},{"product_id":"1-2-x-3-4-pex-f1960-male-sweat-adapter-brass","title":"Sioux Chief 644WG23 3\/4\" PEX F1960 x 1\/2\" Female Sweat Adapter Brass","description":"\u003cp\u003eSioux Chief 644WG23 is a 3\/4\" F1960 expansion x 1\/2\" female sweat (FSWT) straight adapter in no-lead (NL\/DZR) brass.\u003c\/p\u003e\u003cp\u003eThe female sweat end is a socket that accepts copper tube, so it transitions a PEX line onto copper pipe with a soldered joint. F1960 joints are cold-expansion connections: the tube is expanded, the fitting inserted, and the PEX shrinks back onto it. With PowerPEX Type-B tube, Sioux Chief recommends a self-rotating power expansion tool.\u003c\/p\u003e\u003cp\u003eSioux Chief describes the one-piece fitting as full flow with no restriction. Match the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 644WG23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 3\/4\" F1960 expansion x 1\/2\" female sweat (FSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e No-lead (NL\/DZR) brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1960, CSA B137.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236409676\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1960-expansion-fittings\"\u003eF1960 expansion fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351388057703,"sku":"SIOU-644WG23","price":16.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/644WG23.jpg?v=1785817124"},{"product_id":"3-4-x-1-2-pex-f1960-female-sweat-adapter-brass","title":"Sioux Chief 644WG32 3\/4\" x 1\/2\" PEX F1960 Female Sweat Adapter Brass","description":"\u003cp\u003eThe 3\/4\" x 1\/2\" PEX F1960 Female Sweat Adapter Brass by Sioux Chief is part of our f1960 expansion fittings selection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 644WG32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236409973\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1960 Expansion Fittings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351388090471,"sku":"SIOU-644WG32","price":9.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/644WG32.jpg?v=1785817125"},{"product_id":"1-2-pex-f1807-male-sweat-adapter-copper","title":"Sioux Chief 644X2 1\/2\" PEX F1807 x 1\/2\" Female Sweat Adapter Copper","description":"\u003cp\u003eSioux Chief 644X2 is a 1\/2\" F1807 crimp x 1\/2\" female sweat (FSWT) straight adapter in copper.\u003c\/p\u003e\u003cp\u003eThe female sweat end is a socket that accepts copper tube, so it transitions a PEX line onto copper pipe with a soldered joint. F1807 joints are made on SDR9 PEX tube with a copper crimp ring or a stainless V-Sleeve compression sleeve and the matching crimp or compression tool.\u003c\/p\u003e\u003cp\u003eMatch the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 644X2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 1\/2\" F1807 crimp x 1\/2\" female sweat (FSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1807, CSA B137.5, NSF\/ANSI 14, NSF\/ANSI\/CAN 61\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236495273\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.028 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eF1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351388123239,"sku":"SIOU-644X2","price":1.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/644X2.jpg?v=1785817127"},{"product_id":"3-4-pex-sweat-adapter-crimp-f1807-x-ftg-sweat-copper","title":"Sioux Chief 644X3 3\/4\" PEX F1807 x 3\/4\" Female Sweat Adapter Copper","description":"\u003cp\u003eSioux Chief 644X3 is a 3\/4\" F1807 crimp x 3\/4\" female sweat (FSWT) straight adapter in copper.\u003c\/p\u003e\u003cp\u003eThe female sweat end is a socket that accepts copper tube, so it transitions a PEX line onto copper pipe with a soldered joint. F1807 joints are made on SDR9 PEX tube with a copper crimp ring or a stainless V-Sleeve compression sleeve and the matching crimp or compression tool.\u003c\/p\u003e\u003cp\u003eMatch the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 644X3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 3\/4\" F1807 crimp x 3\/4\" female sweat (FSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1807, CSA B137.5, NSF\/ANSI 14, NSF\/ANSI\/CAN 61\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236495280\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.056 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eF1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351388156007,"sku":"SIOU-644X3","price":1.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/644X3.jpg?v=1785817128"},{"product_id":"1-pex-f1807-male-sweat-adapter-copper","title":"Sioux Chief 644X4 1\" PEX F1807 x 1\" Female Sweat Adapter Copper","description":"\u003cp\u003eSioux Chief 644X4 is a 1\" F1807 crimp x 1\" female sweat (FSWT) straight adapter in copper.\u003c\/p\u003e\u003cp\u003eThe female sweat end is a socket that accepts copper tube, so it transitions a PEX line onto copper pipe with a soldered joint. F1807 joints are made on SDR9 PEX tube with a copper crimp ring or a stainless V-Sleeve compression sleeve and the matching crimp or compression tool.\u003c\/p\u003e\u003cp\u003eMatch the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 644X4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 1\" F1807 crimp x 1\" female sweat (FSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1807, CSA B137.5, NSF\/ANSI 14, NSF\/ANSI\/CAN 61\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236482266\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.112 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eF1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351388188775,"sku":"SIOU-644X4","price":4.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/644X4.jpg?v=1785817129"},{"product_id":"1-female-sweat-x-3-4-pex-f1807-connector-barb-copper","title":"Sioux Chief 644X43 1\" Female Sweat x 3\/4\" PEX F1807 Connector Barb Copper","description":"\u003cp\u003eSioux Chief 644X43 is a 3\/4\" F1807 crimp x 1\" female sweat (FSWT) straight adapter in copper.\u003c\/p\u003e\u003cp\u003eThe female sweat end is a socket that accepts copper tube, so it transitions a PEX line onto copper pipe with a soldered joint. F1807 joints are made on SDR9 PEX tube with a copper crimp ring or a stainless V-Sleeve compression sleeve and the matching crimp or compression tool.\u003c\/p\u003e\u003cp\u003eMatch the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 644X43\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 3\/4\" F1807 crimp x 1\" female sweat (FSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1807, CSA B137.5, NSF\/ANSI 14, NSF\/ANSI\/CAN 61\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236403995\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eF1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351388221543,"sku":"SIOU-644X43","price":4.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/644X43.jpg?v=1785817130"},{"product_id":"1-2-pex-f1807-male-sweat-adapter-brass","title":"Sioux Chief 644XG2 1\/2\" PEX F1807 x 1\/2\" Female Sweat Adapter Brass","description":"\u003cp\u003eSioux Chief 644XG2 is a 1\/2\" F1807 crimp x 1\/2\" female sweat (FSWT) straight adapter in no-lead (NL\/DZR) brass.\u003c\/p\u003e\u003cp\u003eThe female sweat end is a socket that accepts copper tube, so it transitions a PEX line onto copper pipe with a soldered joint. F1807 joints are made on SDR9 PEX tube with a copper crimp ring or a stainless V-Sleeve compression sleeve and the matching crimp or compression tool.\u003c\/p\u003e\u003cp\u003eMatch the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 644XG2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 1\/2\" F1807 crimp x 1\/2\" female sweat (FSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e No-lead (NL\/DZR) brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F877, ASTM F1807, CSA B137.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236408822\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.044 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eF1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351388254311,"sku":"SIOU-644XG2","price":1.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/644XG2.jpg?v=1785817131"},{"product_id":"3-4-pex-sweat-adapter-crimp-f1807-x-ftg-sweat-brass","title":"Sioux Chief 644XG3 3\/4\" PEX F1807 x 3\/4\" Female Sweat Adapter Brass","description":"\u003cp\u003eSioux Chief 644XG3 is a 3\/4\" F1807 crimp x 3\/4\" female sweat (FSWT) straight adapter in no-lead (NL\/DZR) brass.\u003c\/p\u003e\u003cp\u003eThe female sweat end is a socket that accepts copper tube, so it transitions a PEX line onto copper pipe with a soldered joint. F1807 joints are made on SDR9 PEX tube with a copper crimp ring or a stainless V-Sleeve compression sleeve and the matching crimp or compression tool.\u003c\/p\u003e\u003cp\u003eMatch the connection standard (F1807 crimp, F1960 expansion or F2159 poly crimp) to the PEX tube, rings and tools already on the job before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sioux Chief\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 644XG3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 3\/4\" F1807 crimp x 3\/4\" female sweat (FSWT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e No-lead (NL\/DZR) brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e ASTM F1807, CSA B137.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739236408839\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e F1807 Crimp Fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.059 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003eF1807 crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/copper-sweat-fittings\"\u003ecopper sweat fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-fittings\"\u003ePEX fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/sioux-chief\"\u003eall Sioux Chief\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sioux Chief","offers":[{"title":"Default Title","offer_id":44351388287079,"sku":"SIOU-644XG3","price":2.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/644XG3.jpg?v=1785817132"},{"product_id":"1-pex-sweat-adapter-crimp-f1807-x-sweat-pureflow-press-brass","title":"Viega 40655 1\" PEX Sweat Adapter (Crimp(F1807) x Sweat) - PureFlow® Crimp (Brass)","description":"\u003cp\u003eViega 40655 is a 1\" PureFlow Crimp PEX sweat adapter in brass (Crimp(F1807) x Sweat).\u003c\/p\u003e\u003cp\u003eA sweat adapter makes the transition from PEX to copper: the copper end is soldered into the copper line before the PEX end is connected.\u003c\/p\u003e\u003cp\u003ePureFlow Crimp fittings join PEX with a copper crimp ring and a full-circle crimp tool. Check each crimp with a go\/no-go gauge. The fittings are made to ASTM F1807 (metal) or F2159 (polymer) for PEX tubing on hot and cold water distribution.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Viega\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 40655\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e PureFlow Crimp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Crimp(F1807) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ASTM F1807 (metal) \/ ASTM F2159 (polymer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160 psi at 73°F, 100 psi at 180°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 691514406558\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.22 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.13 x 1.212 x 1.212 in (L x W x H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Viega PureFlow Crimp Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/viega-pureflow-crimp-fittings\"\u003eall PureFlow Crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003ecrimp rings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ecrimp tools\u003c\/a\u003e, \u003ca href=\"\/collections\/viega\"\u003eall Viega\u003c\/a\u003e.\u003c\/p\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":44353455915111,"sku":"VEGA-40655","price":5.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/Viega_40655_Image1.jpg?v=1785833276"},{"product_id":"3-4-pex-sweat-adapter-crimp-f1807-x-sweat-pureflow-crimp-brass","title":"Viega 46644 3\/4\" PEX Sweat Adapter (Crimp(F1807) x Sweat) - PureFlow® Crimp (Brass)","description":"\u003cp\u003eViega 46644 is a 3\/4\" PureFlow Crimp PEX sweat adapter in brass (Crimp(F1807) x Sweat).\u003c\/p\u003e\u003cp\u003eA sweat adapter makes the transition from PEX to copper: the copper end is soldered into the copper line before the PEX end is connected.\u003c\/p\u003e\u003cp\u003ePureFlow Crimp fittings join PEX with a copper crimp ring and a full-circle crimp tool. Check each crimp with a go\/no-go gauge. The fittings are made to ASTM F1807 (metal) or F2159 (polymer) for PEX tubing on hot and cold water distribution.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Viega\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 46644\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e PureFlow Crimp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Crimp(F1807) x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ASTM F1807 (metal) \/ ASTM F2159 (polymer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160 psi at 73°F, 100 psi at 180°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 691514466446\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.08 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1.48 x 0.876 x 0.876 in (L x W x H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Viega PureFlow Crimp Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/viega-pureflow-crimp-fittings\"\u003eall PureFlow Crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003ecrimp rings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ecrimp tools\u003c\/a\u003e, \u003ca href=\"\/collections\/viega\"\u003eall Viega\u003c\/a\u003e.\u003c\/p\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":44353461059687,"sku":"VEGA-46644","price":2.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/Viega_46644_Image1.jpg?v=1785833333"},{"product_id":"1-pex-sweat-adapter-pureflow-crimp-x-ftg-sweat-pureflow-crimp-brass","title":"Viega 60651 1\" PEX Sweat Adapter (PureFlow Crimp x FTG Sweat) - PureFlow® Crimp (Brass)","description":"\u003cp\u003eViega 60651 is a 1\" PureFlow Crimp PEX sweat adapter in brass (PureFlow Crimp x FTG Sweat).\u003c\/p\u003e\u003cp\u003eA sweat adapter makes the transition from PEX to copper: the copper end is soldered into the copper line before the PEX end is connected.\u003c\/p\u003e\u003cp\u003ePureFlow Crimp fittings join PEX with a copper crimp ring and a full-circle crimp tool. Check each crimp with a go\/no-go gauge. The fittings are made to ASTM F1807 (metal) or F2159 (polymer) for PEX tubing on hot and cold water distribution.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Viega\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 60651\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e PureFlow Crimp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e PureFlow Crimp x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ASTM F1807 (metal) \/ ASTM F2159 (polymer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160 psi at 73°F, 100 psi at 180°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 691514606514\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.11 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1.97 x 1.127 x 1.127 in (L x W x H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Viega PureFlow Crimp Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/viega-pureflow-crimp-fittings\"\u003eall PureFlow Crimp fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/f1807-crimp-fittings\"\u003ecrimp rings\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ecrimp tools\u003c\/a\u003e, \u003ca href=\"\/collections\/viega\"\u003eall Viega\u003c\/a\u003e.\u003c\/p\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":44353473577063,"sku":"VEGA-60651","price":7.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/Viega_60651_Image1.jpg?v=1785833490"},{"product_id":"5-8-x-3-4-pex-elbow-sweat-adapter-crimp-f1807-x-sweat-pureflow-press-brass","title":"Viega 89312 5\/8\" x 3\/4\" PEX Elbow Sweat Adapter (Press x Sweat) - PureFlow® Press (Bronze)","description":"\u003cp\u003eViega 89312 is a 5\/8\" x 3\/4\" PureFlow Press PEX elbow sweat adapter in bronze (Press x Sweat).\u003c\/p\u003e\u003cp\u003eA sweat adapter makes the transition from PEX to copper: the copper end is soldered into the copper line before the PEX end is connected.\u003c\/p\u003e\u003cp\u003eViega PureFlow Press makes a PEX joint with a factory-attached stainless steel sleeve. The three view holes show the tubing is fully inserted, and the press is made with a PureFlow hand tool or power tool. Viega's 5\/8\" bronze PureFlow Press fittings are not zero lead and are for radiant heating systems only, not potable water.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Viega\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 89312\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e PureFlow Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/8\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Elbow Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Press x Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress sleeve:\u003c\/strong\u003e 304 stainless steel, factory attached, with view holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160 psi at 73°F, 100 psi at 180°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 200°F max (hydronic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 691514893129\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.344 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1.094 x 1.76 x 1.724 in (L x W x H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Viega PureFlow Press Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/viega-pureflow-press-fittings\"\u003eall PureFlow Press fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/barrier-tubing\"\u003eBarrier PEX tubing\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ePEX tools\u003c\/a\u003e, \u003ca href=\"\/collections\/viega\"\u003eall Viega\u003c\/a\u003e.\u003c\/p\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":44353480818791,"sku":"VEGA-89312","price":12.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/VEGA-89312.jpg?v=1785833710"},{"product_id":"3-8-x-1-2-pex-sweat-adapter-press-x-ftg-sweat-pureflow-press-brass","title":"Viega 92006 3\/8\" x 1\/2\" PEX Sweat Adapter (Press x FTG Sweat) - PureFlow® Press (Brass)","description":"\u003cp\u003eViega 92006 is a 3\/8\" x 1\/2\" PureFlow Press PEX sweat adapter in brass (Press x FTG Sweat).\u003c\/p\u003e\u003cp\u003eA sweat adapter makes the transition from PEX to copper: the copper end is soldered into the copper line before the PEX end is connected.\u003c\/p\u003e\u003cp\u003eViega PureFlow Press makes a PEX joint with a factory-attached stainless steel sleeve. The three view holes show the tubing is fully inserted, and the press is made with a PureFlow hand tool or power tool. PureFlow Press is approved for hot and cold potable water and, with Viega Barrier PEX, for hydronic heating and cooling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Viega\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 92006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e PureFlow Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8\" x 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Press x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress sleeve:\u003c\/strong\u003e 304 stainless steel, factory attached, with view holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160 psi at 73°F, 100 psi at 180°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 180°F max potable, 200°F max hydronic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListings:\u003c\/strong\u003e ASTM F3347 \/ F3348, CSA B137.5, NSF-pw 372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 691514920061\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Viega PureFlow Press Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/viega-pureflow-press-fittings\"\u003eall PureFlow Press fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/non-barrier-tubing\"\u003ePureFlow PEX tubing\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ePEX tools\u003c\/a\u003e, \u003ca href=\"\/collections\/viega\"\u003eall Viega\u003c\/a\u003e.\u003c\/p\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":44353481932903,"sku":"VEGA-92006","price":8.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/Viega_92006_Image1.jpg?v=1785833749"},{"product_id":"1-2-pex-sweat-adapter-press-x-ftg-sweat-pureflow-press-brass","title":"Viega 92021 1\/2\" PEX Sweat Adapter (Press x FTG Sweat) - PureFlow® Press (Brass)","description":"\u003cp\u003eViega 92021 is a 1\/2\" PureFlow Press PEX sweat adapter in brass (Press x FTG Sweat).\u003c\/p\u003e\u003cp\u003eA sweat adapter makes the transition from PEX to copper: the copper end is soldered into the copper line before the PEX end is connected.\u003c\/p\u003e\u003cp\u003eViega PureFlow Press makes a PEX joint with a factory-attached stainless steel sleeve. The three view holes show the tubing is fully inserted, and the press is made with a PureFlow hand tool or power tool. PureFlow Press is approved for hot and cold potable water and, with Viega Barrier PEX, for hydronic heating and cooling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Viega\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 92021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e PureFlow Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Press x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress sleeve:\u003c\/strong\u003e 304 stainless steel, factory attached, with view holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160 psi at 73°F, 100 psi at 180°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 180°F max potable, 200°F max hydronic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListings:\u003c\/strong\u003e ASTM F3347 \/ F3348, CSA B137.5, NSF-pw 372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 691514920214\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Viega PureFlow Press Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/viega-pureflow-press-fittings\"\u003eall PureFlow Press fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/non-barrier-tubing\"\u003ePureFlow PEX tubing\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ePEX tools\u003c\/a\u003e, \u003ca href=\"\/collections\/viega\"\u003eall Viega\u003c\/a\u003e.\u003c\/p\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":44353481965671,"sku":"VEGA-92021","price":3.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/VEGA-92021.jpg?v=1788488904"},{"product_id":"1-2-x-3-4-pex-sweat-adapter-press-x-ftg-sweat-pureflow-press-brass","title":"Viega 92026 1\/2\" x 3\/4\" PEX Sweat Adapter (Press x FTG Sweat) - PureFlow® Press (Brass)","description":"\u003cp\u003eViega 92026 is a 1\/2\" x 3\/4\" PureFlow Press PEX sweat adapter in brass (Press x FTG Sweat).\u003c\/p\u003e\u003cp\u003eA sweat adapter makes the transition from PEX to copper: the copper end is soldered into the copper line before the PEX end is connected.\u003c\/p\u003e\u003cp\u003eViega PureFlow Press makes a PEX joint with a factory-attached stainless steel sleeve. The three view holes show the tubing is fully inserted, and the press is made with a PureFlow hand tool or power tool. PureFlow Press is approved for hot and cold potable water and, with Viega Barrier PEX, for hydronic heating and cooling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Viega\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 92026\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e PureFlow Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\" x 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Press x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress sleeve:\u003c\/strong\u003e 304 stainless steel, factory attached, with view holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160 psi at 73°F, 100 psi at 180°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 180°F max potable, 200°F max hydronic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListings:\u003c\/strong\u003e ASTM F3347 \/ F3348, CSA B137.5, NSF-pw 372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 691514920269\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Viega PureFlow Press Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/viega-pureflow-press-fittings\"\u003eall PureFlow Press fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/non-barrier-tubing\"\u003ePureFlow PEX tubing\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ePEX tools\u003c\/a\u003e, \u003ca href=\"\/collections\/viega\"\u003eall Viega\u003c\/a\u003e.\u003c\/p\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":44353481998439,"sku":"VEGA-92026","price":7.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/VEGA-92026.jpg?v=1785833751"},{"product_id":"3-4-x-1-2-pex-sweat-adapter-press-x-ftg-sweat-pureflow-press-brass","title":"Viega 92036 3\/4\" x 1\/2\" PEX Sweat Adapter (Press x FTG Sweat) - PureFlow® Press (Brass)","description":"\u003cp\u003eViega 92036 is a 3\/4\" x 1\/2\" PureFlow Press PEX sweat adapter in brass (Press x FTG Sweat).\u003c\/p\u003e\u003cp\u003eA sweat adapter makes the transition from PEX to copper: the copper end is soldered into the copper line before the PEX end is connected.\u003c\/p\u003e\u003cp\u003eViega PureFlow Press makes a PEX joint with a factory-attached stainless steel sleeve. The three view holes show the tubing is fully inserted, and the press is made with a PureFlow hand tool or power tool. PureFlow Press is approved for hot and cold potable water and, with Viega Barrier PEX, for hydronic heating and cooling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Viega\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 92036\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e PureFlow Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\" x 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Press x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress sleeve:\u003c\/strong\u003e 304 stainless steel, factory attached, with view holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160 psi at 73°F, 100 psi at 180°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 180°F max potable, 200°F max hydronic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListings:\u003c\/strong\u003e ASTM F3347 \/ F3348, CSA B137.5, NSF-pw 372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 691514920368\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Viega PureFlow Press Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/viega-pureflow-press-fittings\"\u003eall PureFlow Press fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/non-barrier-tubing\"\u003ePureFlow PEX tubing\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ePEX tools\u003c\/a\u003e, \u003ca href=\"\/collections\/viega\"\u003eall Viega\u003c\/a\u003e.\u003c\/p\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":44353482031207,"sku":"VEGA-92036","price":11.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/VEGA-92036.jpg?v=1785833752"},{"product_id":"3-4-pex-sweat-adapter-press-x-ftg-sweat-pureflow-press-brass","title":"Viega 92041 3\/4\" PEX Sweat Adapter (Press x FTG Sweat) - PureFlow® Press (Brass)","description":"\u003cp\u003eViega 92041 is a 3\/4\" PureFlow Press PEX sweat adapter in brass (Press x FTG Sweat).\u003c\/p\u003e\u003cp\u003eA sweat adapter makes the transition from PEX to copper: the copper end is soldered into the copper line before the PEX end is connected.\u003c\/p\u003e\u003cp\u003eViega PureFlow Press makes a PEX joint with a factory-attached stainless steel sleeve. The three view holes show the tubing is fully inserted, and the press is made with a PureFlow hand tool or power tool. PureFlow Press is approved for hot and cold potable water and, with Viega Barrier PEX, for hydronic heating and cooling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Viega\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 92041\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e PureFlow Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Press x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress sleeve:\u003c\/strong\u003e 304 stainless steel, factory attached, with view holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160 psi at 73°F, 100 psi at 180°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 180°F max potable, 200°F max hydronic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListings:\u003c\/strong\u003e ASTM F3347 \/ F3348, CSA B137.5, NSF-pw 372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 691514920412\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Viega PureFlow Press Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/viega-pureflow-press-fittings\"\u003eall PureFlow Press fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/non-barrier-tubing\"\u003ePureFlow PEX tubing\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ePEX tools\u003c\/a\u003e, \u003ca href=\"\/collections\/viega\"\u003eall Viega\u003c\/a\u003e.\u003c\/p\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":44353482063975,"sku":"VEGA-92041","price":5.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/VEGA-92041.jpg?v=1785833754"},{"product_id":"3-4-x-1-pex-sweat-adapter-press-x-ftg-sweat-pureflow-press-brass","title":"Viega 92045 3\/4\" x 1\" PEX Sweat Adapter (Press x FTG Sweat) - PureFlow® Press (Brass)","description":"\u003cp\u003eViega 92045 is a 3\/4\" x 1\" PureFlow Press PEX sweat adapter in brass (Press x FTG Sweat).\u003c\/p\u003e\u003cp\u003eA sweat adapter makes the transition from PEX to copper: the copper end is soldered into the copper line before the PEX end is connected.\u003c\/p\u003e\u003cp\u003eViega PureFlow Press makes a PEX joint with a factory-attached stainless steel sleeve. The three view holes show the tubing is fully inserted, and the press is made with a PureFlow hand tool or power tool. PureFlow Press is approved for hot and cold potable water and, with Viega Barrier PEX, for hydronic heating and cooling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Viega\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 92045\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e PureFlow Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\" x 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Press x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress sleeve:\u003c\/strong\u003e 304 stainless steel, factory attached, with view holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160 psi at 73°F, 100 psi at 180°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 180°F max potable, 200°F max hydronic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListings:\u003c\/strong\u003e ASTM F3347 \/ F3348, CSA B137.5, NSF-pw 372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 691514920450\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Viega PureFlow Press Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/viega-pureflow-press-fittings\"\u003eall PureFlow Press fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/non-barrier-tubing\"\u003ePureFlow PEX tubing\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ePEX tools\u003c\/a\u003e, \u003ca href=\"\/collections\/viega\"\u003eall Viega\u003c\/a\u003e.\u003c\/p\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":44353482096743,"sku":"VEGA-92045","price":23.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/ViegaHolding_CoKG-Viega_92045_Image2-REP.jpg?v=1788488972"},{"product_id":"1-pex-sweat-adapter-press-x-ftg-sweat-pureflow-press-brass","title":"Viega 92060 1\" PEX Sweat Adapter (Press x FTG Sweat) - PureFlow® Press (Brass)","description":"\u003cp\u003eViega 92060 is a 1\" PureFlow Press PEX sweat adapter in brass (Press x FTG Sweat).\u003c\/p\u003e\u003cp\u003eA sweat adapter makes the transition from PEX to copper: the copper end is soldered into the copper line before the PEX end is connected.\u003c\/p\u003e\u003cp\u003eViega PureFlow Press makes a PEX joint with a factory-attached stainless steel sleeve. The three view holes show the tubing is fully inserted, and the press is made with a PureFlow hand tool or power tool. PureFlow Press is approved for hot and cold potable water and, with Viega Barrier PEX, for hydronic heating and cooling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Viega\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 92060\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e PureFlow Press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Sweat Adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Press x FTG Sweat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress sleeve:\u003c\/strong\u003e 304 stainless steel, factory attached, with view holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160 psi at 73°F, 100 psi at 180°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e 180°F max potable, 200°F max hydronic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListings:\u003c\/strong\u003e ASTM F3347 \/ F3348, CSA B137.5, NSF-pw 372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 691514920603\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Viega PureFlow Press Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee also: \u003ca href=\"\/collections\/viega-pureflow-press-fittings\"\u003eall PureFlow Press fittings\u003c\/a\u003e, \u003ca href=\"\/collections\/non-barrier-tubing\"\u003ePureFlow PEX tubing\u003c\/a\u003e, \u003ca href=\"\/collections\/pex-tools\"\u003ePEX tools\u003c\/a\u003e, \u003ca href=\"\/collections\/viega\"\u003eall Viega\u003c\/a\u003e.\u003c\/p\u003e","brand":"Viega","offers":[{"title":"Default Title","offer_id":44353482129511,"sku":"VEGA-92060","price":11.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/2253\/3479\/files\/ViegaHolding_CoKG-Viega_92060_Image2-LINE.jpg?v=1785833758"}],"url":"https:\/\/www.thehousesupplier.com\/collections\/copper-to-pex-adapters.oembed","provider":"The House Supplier","version":"1.0","type":"link"}