The DS06-105-DUT-LF is a lead-free pressure reducing valve from Resideo (Honeywell Home), 2 inch, NPT connection, double union.
A pressure reducing valve sits where the water service enters the building and holds house pressure at a set value regardless of what the street is doing. Municipal mains commonly run well above what residential fixtures are rated for, and street pressure is not constant — it climbs at night when demand drops.
Uncontrolled pressure is what shortens the life of everything downstream. Fill valves, supply lines, washing machine hoses and water heaters all fail earlier on high pressure, and most plumbing codes cap what may be delivered to fixtures. The PRV is the single component that decides whether the rest of the system lives at its rated pressure.
This is a DialSet valve: the outlet pressure is set on a dial on the valve itself, without plumbing in a gauge and without trial and error. On a commissioning visit that is the difference between setting the pressure in a minute and chasing it with a test gauge and an adjusting screw.
The double union body comes apart on both sides, so the valve is removed and serviced without cutting the line. On a water service that is often the only accessible point in the system, that matters more than it sounds.
Lead free construction, as required for potable water in the United States.
Size the valve to the service line, not to the fixture count. An oversized PRV hunts at low flow; an undersized one starves the building at peak draw.
-
Brand: Resideo (Honeywell Home)
-
Manufacturer Part #: DS06-105-DUT-LF/U
-
Type: Pressure reducing valve
-
Size: 2 in
-
Connection: NPT
-
Union: Double union
-
DialSet: Yes
-
Lead free: Yes
-
UPC: 085267105873
-
Category: Pressure Reducing Valves
Full Specifications
| Ambient Operating Temperature (Min) |
33°F, 1 °C |
| Ambient Operating Temperature (Max) |
140°F, 60 °C |
| Approvals and Standards |
ASSE 1003-2020 Listed, CSA Certified (B356-10), IAPMO Listed, NSF/ANSI 61 Compliant, NSF/ANSI 372 Compliant, UPC Listed, Lead Free Plumbing Code Compliance The wettable surfaces contain less than 0.25% of lead by weighted average |
| Color |
Metallic, Black |
| Connection Size |
2 in |
| Connection Type |
Double Union Thread (NPT) |
| Differential Pressure (Min) |
14.5 psi, 99.97 kPa |
| Domestic Hot Water |
Valve |
| Inlet Pressure (Max) |
250 psi, 1723.69 kPa |
| Lead Free |
Yes |
| Media Temperature (Min) |
33°F, 1 °C |
| Media Temperature (Max) |
140°F, 60 °C |
| Number of Connections |
2 |
| Outlet Pressure (Min) |
25 psi, 172.37 kPa |
| Outlet Pressure (Max) |
90 psi, 620.53 kPa |
| Preset Outlet Pressure |
60 psi, 414 kPa |
| Pressure Reducing Ratio |
10:1 Maximum |
| Product Height |
11.81 in, 300 mm |
| Product Length |
8.58 in, 218 mm |
| Replacement Parts |
D06FA-11/2, ES06F-11/2A, SB06T-11/2 |
| Valve Body Material |
Lead-free ECO BRASS® |
| Valve Body Pattern |
Straight Through |
| Warranty |
1 Year |
| Application |
Potable Water Pressure Regulation |
| Valve Type |
DialSet Pressure Regulating Valve |
| DN Size |
DN50 |
| Controlled Media |
Potable Water |
| Product Features |
Dial Calibration ± 4 psi, Balanced cartridge design allows for thermal expansion properties. Use expansion tanks and safety valves where applicable. |
| Valve Diaphragm Material |
Fabric-reinforced diaphragm |
| Number of Gauge Taps |
1 |
Documents & Downloads